Problem laaaaaangsames booten von Ducky Rechner - dmesg

Vorheriges Thema anzeigen Nächstes Thema anzeigen Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Serendipity am Sa 9 Aug - 22:58

Ich hatte mal ein ähnlich gelagertes Problem. Mir hat ein DVD Brenner 2 HDD's zerschossen. Fragt mich nicht warum. DVD Brenner getauscht und siehe da, die Platte läuft heute noch (4 Jahre lang)

_________________
From everything I've ever lost, it is my mind, I miss the most
avatar
Serendipity

Anzahl der Beiträge : 46
Anmeldedatum : 06.03.14
Alter : 33
Ort : Iuvavum

Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Pümpel am Sa 9 Aug - 13:21

Waschen wird eh überbewertet  Very Happy 

_________________
Gott sei dank! Ich bin weg vom Fenster!
avatar
Pümpel

Anzahl der Beiträge : 1270
Anmeldedatum : 06.03.14
Ort : zu Hause

Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Blindenhund am Sa 9 Aug - 13:19

dann kommt sowas:

Papaschlumpf - jetzt ist die Kiste sooo schnell, dass ich keine Zeit mehr habe, Zähne zu putzen. Danke!!

_________________
Meine Signatur ist in Windows verschollen.
Ich hab einen OMG mit doppelt plus alles und Warmwasserbeleuchtung auf quadriplem Trikolor-Banausenprozessor
nebst 3D-beschleunigtem Isotopenlaufwerk und installiertem Linux 9 3/4
avatar
Blindenhund

Anzahl der Beiträge : 1388
Anmeldedatum : 05.03.14
Ort : tief in mir ruhend

Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Gast am Sa 9 Aug - 13:16

wie im Chat Herr Pümpel kein IDE Anschluß am Board vorhanden nur Sata  lol!  In der Bucht gibbet die SH-222BB Modelle für ca. 18 Euro Kostenlos nach Hause - dann bekommt Ducky 2 Stück zum B-Day am 28. und dann guckt der wenn er die Kiste einschaltet wie die rennt  clown 

Gast
Gast


Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Pümpel am Sa 9 Aug - 13:01

Dein DVD ist bestimmt mit IDE Anschluß? wenn ja vielleicht geht das Board hin und fragt als erstes die IDE schnittstelle ab? schau mal nachob es evtl daran liegt.
Ansonsten könnte ich die empfehlen einen externen Brenner anzuschließen.

_________________
Gott sei dank! Ich bin weg vom Fenster!
avatar
Pümpel

Anzahl der Beiträge : 1270
Anmeldedatum : 06.03.14
Ort : zu Hause

Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Gast am Sa 9 Aug - 12:48

Nein SSD als erste

Gast
Gast


Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Pümpel am Sa 9 Aug - 12:47

Hast du vielleicht die Bootreihenfolge so eingestellt das er als erstes versucht vom DVD Rom zu booten?

_________________
Gott sei dank! Ich bin weg vom Fenster!
avatar
Pümpel

Anzahl der Beiträge : 1270
Anmeldedatum : 06.03.14
Ort : zu Hause

Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Gast am Sa 9 Aug - 12:43

Hab heute mal den Radikalen gemacht  lol!  Board aus meinen Linux PC in Duckys Kiste rein  Shocked  - nachdem ich ja schon den Ram getauscht - die Graka gegen eine andere und die SSD ebenfalls gewechselt habe - hab ich ebenso die XBox Controller auf Verdacht abgeklemmt - nix  affraid 

Ganz zum Schluß doofer Gedanke - da ja an dem anderen PC in allen Kombinationen alles flott lief nur bei Ducky halt nicht - DVD Brenner abgeklemmt - und - was ist das für ein Scheiß  Shocked   affraid  Ducky's Kiste bootet Mega schnell !!!!

Also aus irgendeinem Grund liegt es an den DVD Brennern - Typ Samsung Modell SH-223 - im Gamer sind SH-222BB verbaut und die laufen ohne Problemen !!

Gast
Gast


Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Gast am Sa 9 Aug - 8:57

Danke - aber das Board hat kein UEFI denke mal es geht trotzdem teste nachher mal........

Gast
Gast


Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Pümpel am Fr 8 Aug - 16:16


_________________
Gott sei dank! Ich bin weg vom Fenster!
avatar
Pümpel

Anzahl der Beiträge : 1270
Anmeldedatum : 06.03.14
Ort : zu Hause

Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Gast am Di 5 Aug - 20:15

Ducky's SSD und HDD an meinem Linux (Test) PC

[ 0.314862] system 00:09: [io 0x0c6f] has been reserved
[ 0.314863] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.314865] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.314867] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.314868] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.314870] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.314872] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.314874] system 00:09: [io 0x0b00-0x0b0f] has been reserved
[ 0.314875] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.314877] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.314878] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.314880] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.314882] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.314884] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.314886] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.314994] system 00:0a: [io 0x0e80-0x0f5f] has been reserved
[ 0.314996] system 00:0a: [io 0x0ae0-0x0aef] has been reserved
[ 0.314998] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.315047] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.315049] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.329656] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.329661] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.329663] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.329664] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.329666] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.329669] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.329751] pnp: PnP ACPI: found 13 devices
[ 0.329752] ACPI: bus type PNP unregistered
[ 0.336492] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.336495] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.336498] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.336501] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.336504] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.336506] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.336508] pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.336510] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.336513] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.336525] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.336526] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.336528] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.336529] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.336531] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.336533] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.336534] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.336536] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.336538] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.336539] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.336541] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.336543] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.336544] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.336546] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.336548] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.336549] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.336551] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.336552] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.336594] NET: Registered protocol family 2
[ 0.336785] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.336876] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.336992] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.337025] TCP: reno registered
[ 0.337034] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.337057] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.337180] NET: Registered protocol family 1
[ 0.761142] pci 0000:01:00.0: Boot video device
[ 0.761151] PCI: CLS 64 bytes, default 64
[ 0.761205] Trying to unpack rootfs image as initramfs...
[ 1.133927] Freeing initrd memory: 26236K (ffff880034cb2000 - ffff880036651000)
[ 1.134213] PCI-DMA: Disabling AGP.
[ 1.134296] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.134297] PCI-DMA: using GART IOMMU.
[ 1.134299] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.137571] LVT offset 1 assigned for vector 0x400
[ 1.137582] IBS: LVT offset 1 assigned
[ 1.137632] perf: AMD IBS detected (0x0000001f)
[ 1.137690] microcode: CPU0: patch_level=0x010000c8
[ 1.137697] microcode: CPU1: patch_level=0x010000c8
[ 1.137760] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.137761] Scanning for low memory corruption every 60 seconds
[ 1.138122] Initialise system trusted keyring
[ 1.138172] audit: initializing netlink socket (disabled)
[ 1.138182] type=2000 audit(1407269489.028:1): initialized
[ 1.160163] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.161345] zbud: loaded
[ 1.161562] VFS: Disk quotas dquot_6.5.2
[ 1.161635] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.162216] fuse init (API version 7.22)
[ 1.162349] msgmni has been set to 7896
[ 1.162419] Key type big_key registered
[ 1.162981] Key type asymmetric registered
[ 1.162982] Asymmetric key parser 'x509' registered
[ 1.163013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.163063] io scheduler noop registered
[ 1.163065] io scheduler deadline registered (default)
[ 1.163093] io scheduler cfq registered
[ 1.163290] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.163404] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.163446] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.163458] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.163489] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 1.163490] vesafb: scrolling: redraw
[ 1.163492] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.163703] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5824k, total 5824k
[ 1.178791] Console: switching to colour frame buffer device 175x65
[ 1.193696] fb0: VESA VGA frame buffer device
[ 1.193712] ipmi message handler version 39.2
[ 1.193769] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.193773] ACPI: Power Button [PWRB]
[ 1.193798] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.193799] ACPI: Power Button [PWRF]
[ 1.193858] ACPI: processor limited to max C-state 1
[ 1.193988] GHES: HEST is not enabled!
[ 1.194078] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.214526] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.215897] Linux agpgart interface v0.103
[ 1.217459] brd: module loaded
[ 1.218474] loop: module loaded
[ 1.218781] libphy: Fixed MDIO Bus: probed
[ 1.218847] tun: Universal TUN/TAP device driver, 1.6
[ 1.218848] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.218919] PPP generic driver version 2.4.2
[ 1.218959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.218962] ehci-pci: EHCI PCI platform driver
[ 1.219088] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.219094] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.219097] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.219108] ehci-pci 0000:00:12.2: debug port 1
[ 1.219150] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 1.228577] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.228643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.228645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.228646] usb usb1: Product: EHCI Host Controller
[ 1.228648] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 1.228649] usb usb1: SerialNumber: 0000:00:12.2
[ 1.228788] hub 1-0:1.0: USB hub found
[ 1.228793] hub 1-0:1.0: 6 ports detected
[ 1.229022] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.229027] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.229030] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.229041] ehci-pci 0000:00:13.2: debug port 1
[ 1.229079] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
[ 1.240555] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.240622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240625] usb usb2: Product: EHCI Host Controller
[ 1.240626] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 1.240628] usb usb2: SerialNumber: 0000:00:13.2
[ 1.240778] hub 2-0:1.0: USB hub found
[ 1.240784] hub 2-0:1.0: 6 ports detected
[ 1.240897] ehci-platform: EHCI generic platform driver
[ 1.240907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.240908] ohci-pci: OHCI PCI platform driver
[ 1.241034] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.241038] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.241061] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 1.300526] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.300529] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.300531] usb usb3: Product: OHCI PCI host controller
[ 1.300532] usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[ 1.300533] usb usb3: SerialNumber: 0000:00:12.0
[ 1.300674] hub 3-0:1.0: USB hub found
[ 1.300687] hub 3-0:1.0: 3 ports detected
[ 1.300880] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.300885] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.300900] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 1.360472] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.360475] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.360477] usb usb4: Product: OHCI PCI host controller
[ 1.360478] usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[ 1.360479] usb usb4: SerialNumber: 0000:00:12.1
[ 1.360617] hub 4-0:1.0: USB hub found
[ 1.360628] hub 4-0:1.0: 3 ports detected
[ 1.360816] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.360821] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.360844] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 1.420407] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.420411] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.420412] usb usb5: Product: OHCI PCI host controller
[ 1.420413] usb usb5: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[ 1.420415] usb usb5: SerialNumber: 0000:00:13.0
[ 1.420553] hub 5-0:1.0: USB hub found
[ 1.420565] hub 5-0:1.0: 3 ports detected
[ 1.420756] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.420760] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.420775] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 1.480351] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.480354] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480356] usb usb6: Product: OHCI PCI host controller
[ 1.480357] usb usb6: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[ 1.480358] usb usb6: SerialNumber: 0000:00:13.1
[ 1.480496] hub 6-0:1.0: USB hub found
[ 1.480508] hub 6-0:1.0: 3 ports detected
[ 1.480695] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.480699] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.480713] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fa000
[ 1.540308] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.540311] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.540312] usb usb7: Product: OHCI PCI host controller
[ 1.540314] usb usb7: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[ 1.540315] usb usb7: SerialNumber: 0000:00:14.5
[ 1.540474] hub 7-0:1.0: USB hub found
[ 1.540489] hub 7-0:1.0: 2 ports detected
[ 1.540560] ohci-platform: OHCI generic platform driver
[ 1.540570] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.540623] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.541023] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.541032] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.541164] mousedev: PS/2 mouse device common for all mice
[ 1.541281] rtc_cmos 00:02: RTC can wake from S4
[ 1.541426] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.541450] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.541523] device-mapper: uevent: version 1.0.3
[ 1.541619] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.541639] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.541725] TCP: cubic registered
[ 1.541815] NET: Registered protocol family 10
[ 1.541997] NET: Registered protocol family 17
[ 1.542006] Key type dns_resolver registered
[ 1.542275] Loading compiled-in X.509 certificates
[ 1.543182] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
[ 1.543191] registered taskstats version 1
[ 1.545419] Key type trusted registered
[ 1.547273] Key type encrypted registered
[ 1.549166] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.549169] IMA: No TPM chip found, activating TPM-bypass!
[ 1.549398] regulator-dummy: disabling
[ 1.549504] Magic number: 10:126:194
[ 1.549624] rtc_cmos 00:02: setting system clock to 2014-08-05 20:11:30 UTC (1407269490)
[ 1.549746] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.549812] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.549813] EDD information not available.
[ 1.549836] PM: Hibernation image not present or could not be loaded.
[ 1.551098] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[ 1.551101] Write protecting the kernel read-only data: 12288k
[ 1.553199] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
[ 1.554876] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
[ 1.573175] systemd-udevd[145]: starting version 204
[ 1.593081] ahci 0000:00:11.0: version 3.0
[ 1.593296] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.593299] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.593867] scsi0 : ahci
[ 1.593930] scsi1 : ahci
[ 1.593983] scsi2 : ahci
[ 1.594020] scsi3 : ahci
[ 1.594050] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
[ 1.594052] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
[ 1.594055] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
[ 1.594057] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
[ 1.595182] wmi: Mapper loaded
[ 1.598111] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.598126] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.598346] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.598559] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000064e000, d4:3d:7e:ef:7d:8c, XID 0c900800 IRQ 42
[ 1.598560] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.607077] scsi4 : pata_atiixp
[ 1.607150] scsi5 : pata_atiixp
[ 1.607181] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.607183] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.911967] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.912003] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.083755] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.083786] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.085699] ata1.00: supports DRM functions and may not be fully accessible
[ 2.085760] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.085762] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
[ 2.085764] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.085970] ata1.00: supports DRM functions and may not be fully accessible
[ 2.086029] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.086032] ata1.00: configured for UDMA/133
[ 2.086286] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 2.086484] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.086510] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.086614] sd 0:0:0:0: [sda] Write Protect is off
[ 2.086616] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.086642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.087152] sda: sda1 sda2 sda3
[ 2.087491] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.089459] ata3.00: ATA-8: SAMSUNG HD322GJ, 1AR10001, max UDMA/133
[ 2.089463] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.095202] ata3.00: configured for UDMA/133
[ 2.095426] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD322GJ 1AR1 PQ: 0 ANSI: 5
[ 2.095573] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.095642] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.095765] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.095770] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.095808] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.098859] sdb: sdb1
[ 2.099111] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.135693] tsc: Refined TSC clocksource calibration: 3000.012 MHz
[ 2.471367] usb 4-2: new full-speed USB device number 2 using ohci-pci
[ 2.646228] usb 4-2: New USB device found, idVendor=045e, idProduct=0745
[ 2.646232] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.646234] usb 4-2: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[ 2.646236] usb 4-2: Manufacturer: Microsoft
[ 2.651261] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.659046] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input5
[ 2.659150] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:12.1-2/input0
[ 2.664893] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input6
[ 2.665017] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:12.1-2/input1
[ 2.687324] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.2/input/input7
[ 2.687466] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:12.1-2/input2
[ 2.687484] usbcore: registered new interface driver usbhid
[ 2.687485] usbhid: USB HID core driver
[ 3.134796] Switched to clocksource tsc
[ 3.166700] usb 5-2: new full-speed USB device number 2 using ohci-pci
[ 3.341512] usb 5-2: New USB device found, idVendor=0a5c, idProduct=21e8
[ 3.341516] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.341518] usb 5-2: Product: BCM20702A0
[ 3.341519] usb 5-2: Manufacturer: Broadcom Corp
[ 3.341521] usb 5-2: SerialNumber: 5CF370614B63
[ 3.482378] usb 3-2: new full-speed USB device number 2 using ohci-pci
[ 3.530150] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.633304] random: init urandom read with 91 bits of entropy available
[ 3.660201] usb 3-2: New USB device found, idVendor=045e, idProduct=074f
[ 3.660205] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.660207] usb 3-2: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v5.0
[ 3.660209] usb 3-2: Manufacturer: Microsoft
[ 3.670850] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v5.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input8
[ 3.670964] hid-generic 0003:045E:074F.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v5.0] on usb-0000:00:12.0-2/input0
[ 3.835931] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k SSFS
[ 3.887678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.904465] random: nonblocking pool is initialized
[ 3.943925] systemd-udevd[399]: starting version 204
[ 4.014561] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 4.015734] lp: driver loaded but no devices found
[ 4.044149] ppdev: user-space parallel port driver
[ 4.047154] parport_pc 00:06: reported by Plug and Play ACPI
[ 4.047211] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.103579] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 4.103582] AMD IOMMUv2 functionality not available on this system
[ 4.120176] device-mapper: multipath: version 1.6.0 loaded
[ 4.133284] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.133288] Disabling lock debugging due to kernel taint
[ 4.142132] lp0: using parport0 (interrupt-driven).
[ 4.174300] systemd-udevd[420]: renamed network interface eth0 to eth1
[ 4.186028] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[ 4.209862] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[ 4.209869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.214857] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 4.214949] sp5100_tco: PCI Revision ID: 0x3c
[ 4.214968] sp5100_tco: failed to find MMIO address, giving up.
[ 4.235905] MCE: In-kernel MCE decoding enabled.
[ 4.238145] EDAC MC: Ver: 3.0.0
[ 4.252745] AMD64 EDAC driver v3.4.0
[ 4.252777] EDAC amd64: DRAM ECC disabled.
[ 4.252782] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.252782] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.252782] (Note that use of the override may cause unknown side effects.)
[ 4.302111] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3788 MBytes.
[ 4.302248] <6>[fglrx] vendor: 1002 device: 68be count: 1
[ 4.302547] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 4.302790] <6>[fglrx] Kernel PAT support is enabled
[ 4.302809] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[ 4.369979] hda-intel 0000:00:14.2: Using LPIB position fix
[ 4.398969] kvm: Nested Virtualization enabled
[ 4.398978] kvm: Nested Paging enabled
[ 4.401221] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 4.427716] SKU: Nid=0x1d sku_cfg=0x4005c603
[ 4.427720] SKU: port_connectivity=0x1
[ 4.427721] SKU: enable_pcbeep=0x0
[ 4.427731] SKU: check_sum=0x00000005
[ 4.427732] SKU: customization=0x000000c6
[ 4.427733] SKU: external_amp=0x0
[ 4.427733] SKU: platform_type=0x0
[ 4.427734] SKU: swap=0x1
[ 4.427735] SKU: override=0x1
[ 4.428005] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 4.428007] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.428008] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.428008] mono: mono_out=0x0
[ 4.428009] dig-out=0x1e/0x0
[ 4.428010] inputs:
[ 4.428011] Front Mic=0x19
[ 4.428012] Rear Mic=0x18
[ 4.428023] Line=0x1a
[ 4.428024] realtek: No valid SSID, checking pincfg 0x4005c603 for NID 0x1d
[ 4.428025] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887
[ 4.494666] Bluetooth: Core ver 2.17
[ 4.495079] NET: Registered protocol family 31
[ 4.495081] Bluetooth: HCI device and connection manager initialized
[ 4.495089] Bluetooth: HCI socket layer initialized
[ 4.495091] Bluetooth: L2CAP socket layer initialized
[ 4.495096] Bluetooth: SCO socket layer initialized
[ 4.536718] usbcore: registered new interface driver btusb
[ 4.537447] usb 5-2: Direct firmware load failed with error -2
[ 4.537449] usb 5-2: Falling back to user helper
[ 4.540614] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.540617] Bluetooth: BNEP filters: protocol multicast
[ 4.540635] Bluetooth: BNEP socket layer initialized
[ 4.542106] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 4.542201] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 4.542272] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 4.542342] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 4.542436] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 4.542927] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 4.542929] hda-intel 0000:01:00.1: Using LPIB position fix
[ 4.542965] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 4.543137] Bluetooth: RFCOMM TTY layer initialized
[ 4.543152] Bluetooth: RFCOMM socket layer initialized
[ 4.543422] Bluetooth: RFCOMM ver 1.11
[ 4.550618] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 4.567415] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 4.685703] init: cups main process (584) killed by HUP signal
[ 4.685718] init: cups main process ended, respawning
[ 5.047921] init: failsafe main process (690) killed by TERM signal
[ 5.052060] init: samba-ad-dc main process (718) terminated with status 1
[ 5.109808] Bluetooth: can't load firmware, may not work correctly
[ 5.438452] r8169 0000:02:00.0 eth1: link down
[ 5.438469] r8169 0000:02:00.0 eth1: link down
[ 5.438562] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5.439398] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6.010881] init: plymouth-upstart-bridge main process ended, respawning
[ 6.163350] init: plymouth-stop pre-start process (1323) terminated with status 1
[ 6.201200] init: udev-fallback-graphics main process (1332) terminated with status 1
[ 6.224629] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[ 6.230385] <6>[fglrx] Firegl kernel thread PID: 1343
[ 6.230616] <6>[fglrx] Firegl kernel thread PID: 1344
[ 6.231827] <6>[fglrx] Firegl kernel thread PID: 1345
[ 6.231970] <6>[fglrx] IRQ 44 Enabled
[ 6.268707] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 6.268712] <6>[fglrx] Reserved FB block: Unshared offset:f8a0000, size:4000
[ 6.268714] <6>[fglrx] Reserved FB block: Unshared offset:f8a4000, size:45c000
[ 6.268715] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 7.790893] r8169 0000:02:00.0 eth1: link up
[ 7.790905] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready


bootet in gefühlten 8-10 sec

Denke mal sein Board (gleiche wie bei mir drinne) hat einen wech  Rolling Eyes 

Gast
Gast


Nach oben Nach unten

Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Gast am Mo 4 Aug - 18:52

LM 17 Cinnamon

[    0.252751] NET: Registered protocol family 1
[    0.674302] pci 0000:01:00.0: Boot video device
[    0.674311] PCI: CLS 64 bytes, default 64
[    0.674374] Trying to unpack rootfs image as initramfs...
[    1.047003] Freeing initrd memory: 26236K (ffff880034cb2000 - ffff880036651000)
[    1.047294] PCI-DMA: Disabling AGP.
[    1.047373] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.047374] PCI-DMA: using GART IOMMU.
[    1.047377] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.050633] LVT offset 1 assigned for vector 0x400
[    1.050643] IBS: LVT offset 1 assigned
[    1.050694] perf: AMD IBS detected (0x0000001f)
[    1.050748] microcode: CPU0: patch_level=0x010000c8
[    1.050754] microcode: CPU1: patch_level=0x010000c8
[    1.050817] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.050818] Scanning for low memory corruption every 60 seconds
[    1.051182] Initialise system trusted keyring
[    1.051233] audit: initializing netlink socket (disabled)
[    1.051244] type=2000 audit(1407177411.948:1): initialized
[    1.073220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.074400] zbud: loaded
[    1.074638] VFS: Disk quotas dquot_6.5.2
[    1.074707] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.075280] fuse init (API version 7.22)
[    1.075418] msgmni has been set to 7894
[    1.075488] Key type big_key registered
[    1.076062] Key type asymmetric registered
[    1.076064] Asymmetric key parser 'x509' registered
[    1.076094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.076145] io scheduler noop registered
[    1.076146] io scheduler deadline registered (default)
[    1.076172] io scheduler cfq registered
[    1.076370] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.076486] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    1.076528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.076539] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.076569] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    1.076569] vesafb: scrolling: redraw
[    1.076571] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.076783] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5824k, total 5824k
[    1.091869] Console: switching to colour frame buffer device 175x65
[    1.106774] fb0: VESA VGA frame buffer device
[    1.106790] ipmi message handler version 39.2
[    1.106844] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.106848] ACPI: Power Button [PWRB]
[    1.106874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.106875] ACPI: Power Button [PWRF]
[    1.106934] ACPI: processor limited to max C-state 1
[    1.107062] GHES: HEST is not enabled!
[    1.107155] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.127605] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.128967] Linux agpgart interface v0.103
[    1.130534] brd: module loaded
[    1.131549] loop: module loaded
[    1.131861] libphy: Fixed MDIO Bus: probed
[    1.131926] tun: Universal TUN/TAP device driver, 1.6
[    1.131927] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.131999] PPP generic driver version 2.4.2
[    1.132039] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.132042] ehci-pci: EHCI PCI platform driver
[    1.132172] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.132179] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.132183] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.132194] ehci-pci 0000:00:12.2: debug port 1
[    1.132236] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[    1.141739] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.141811] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.141813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.141815] usb usb1: Product: EHCI Host Controller
[    1.141816] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.141818] usb usb1: SerialNumber: 0000:00:12.2
[    1.141991] hub 1-0:1.0: USB hub found
[    1.142000] hub 1-0:1.0: 6 ports detected
[    1.142226] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.142231] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.142234] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.142244] ehci-pci 0000:00:13.2: debug port 1
[    1.142283] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
[    1.153712] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.153778] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.153780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.153781] usb usb2: Product: EHCI Host Controller
[    1.153782] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.153784] usb usb2: SerialNumber: 0000:00:13.2
[    1.153924] hub 2-0:1.0: USB hub found
[    1.153930] hub 2-0:1.0: 6 ports detected
[    1.154037] ehci-platform: EHCI generic platform driver
[    1.154047] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.154049] ohci-pci: OHCI PCI platform driver
[    1.154188] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.154192] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.154215] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
[    1.213687] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.213690] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.213692] usb usb3: Product: OHCI PCI host controller
[    1.213693] usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.213695] usb usb3: SerialNumber: 0000:00:12.0
[    1.213835] hub 3-0:1.0: USB hub found
[    1.213846] hub 3-0:1.0: 3 ports detected
[    1.214040] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.214045] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.214059] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
[    1.273634] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.273638] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.273639] usb usb4: Product: OHCI PCI host controller
[    1.273640] usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.273642] usb usb4: SerialNumber: 0000:00:12.1
[    1.273780] hub 4-0:1.0: USB hub found
[    1.273793] hub 4-0:1.0: 3 ports detected
[    1.273978] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.273983] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.274005] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
[    1.333574] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.333577] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.333579] usb usb5: Product: OHCI PCI host controller
[    1.333580] usb usb5: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.333581] usb usb5: SerialNumber: 0000:00:13.0
[    1.333716] hub 5-0:1.0: USB hub found
[    1.333731] hub 5-0:1.0: 3 ports detected
[    1.333922] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.333926] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.333942] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9f7000
[    1.393514] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.393517] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.393518] usb usb6: Product: OHCI PCI host controller
[    1.393520] usb usb6: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.393521] usb usb6: SerialNumber: 0000:00:13.1
[    1.393660] hub 6-0:1.0: USB hub found
[    1.393672] hub 6-0:1.0: 3 ports detected
[    1.393860] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.393864] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.393879] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9f6000
[    1.453475] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.453479] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.453480] usb usb7: Product: OHCI PCI host controller
[    1.453481] usb usb7: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
[    1.453483] usb usb7: SerialNumber: 0000:00:14.5
[    1.453617] hub 7-0:1.0: USB hub found
[    1.453629] hub 7-0:1.0: 2 ports detected
[    1.453697] ohci-platform: OHCI generic platform driver
[    1.453707] uhci_hcd: USB Universal Host Controller Interface driver
[    1.453761] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.454130] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.454134] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.454241] mousedev: PS/2 mouse device common for all mice
[    1.454371] rtc_cmos 00:02: RTC can wake from S4
[    1.454529] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.454556] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.454636] device-mapper: uevent: version 1.0.3
[    1.454732] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.454754] ledtrig-cpu: registered to indicate activity on CPUs
[    1.454839] TCP: cubic registered
[    1.454925] NET: Registered protocol family 10
[    1.455107] NET: Registered protocol family 17
[    1.455114] Key type dns_resolver registered
[    1.455365] Loading compiled-in X.509 certificates
[    1.456267] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
[    1.456281] registered taskstats version 1
[    1.458434] Key type trusted registered
[    1.460333] Key type encrypted registered
[    1.462051] AppArmor: AppArmor sha1 policy hashing enabled
[    1.462054] IMA: No TPM chip found, activating TPM-bypass!
[    1.462284] regulator-dummy: disabling
[    1.462349]   Magic number: 10:801:644
[    1.462454] rtc_cmos 00:02: setting system clock to 2014-08-04 18:36:53 UTC (1407177413)
[    1.462570] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.462634] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.462635] EDD information not available.
[    1.462659] PM: Hibernation image not present or could not be loaded.
[    1.463936] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    1.463939] Write protecting the kernel read-only data: 12288k
[    1.466046] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
[    1.467731] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
[    1.486076] systemd-udevd[144]: starting version 204
[    1.499233] ahci 0000:00:11.0: version 3.0
[    1.499472] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.499476] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.501273] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.501287] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.505490] scsi0 : ahci
[    1.506240] scsi1 : ahci
[    1.506287] scsi2 : ahci
[    1.506338] scsi3 : ahci
[    1.506377] scsi4 : ahci
[    1.506416] scsi5 : ahci
[    1.506449] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
[    1.506451] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
[    1.506454] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
[    1.506456] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
[    1.506459] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 22
[    1.506461] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 22
[    1.508998] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    1.509216] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010736000, 44:8a:5b:5f:3e:be, XID 0c900800 IRQ 42
[    1.509218] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.510219] scsi6 : pata_atiixp
[    1.510272] scsi7 : pata_atiixp
[    1.510303] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.510304] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.513484] wmi: Mapper loaded
[    1.825088] ata5: SATA link down (SStatus 0 SControl 300)
[    1.825139] ata4: SATA link down (SStatus 0 SControl 300)
[    1.996918] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.996949] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.996978] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.997102] ata1.00: supports DRM functions and may not be fully accessible
[    1.997169] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    1.997171] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
[    1.997173] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.997381] ata1.00: supports DRM functions and may not be fully accessible
[    1.997442] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    1.997445] ata1.00: configured for UDMA/133
[    1.997689] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  EXT0 PQ: 0 ANSI: 5
[    1.997886] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.997918] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max UDMA/100
[    1.997957] sd 0:0:0:0: [sda] Write Protect is off
[    1.997959] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.997962] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.998070] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.998503] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
[    1.999018] ata3.00: configured for UDMA/100
[    2.000919] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.001136]  sda: sda1 sda2 sda3
[    2.001585] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.006623] ata2.00: ATA-8: SAMSUNG HD322GJ, 1AR10001, max UDMA/133
[    2.006626] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.012367] ata2.00: configured for UDMA/133
[    2.012590] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD322GJ  1AR1 PQ: 0 ANSI: 5
[    2.012759] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.012814] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.012879] sd 1:0:0:0: [sdb] Write Protect is off
[    2.012881] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.012916] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.013568] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223C  SB05 PQ: 0 ANSI: 5
[    2.015695] sr0: scsi3-mmc drive: 47x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.015699] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.015814] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.015889] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.021725]  sdb: sdb1
[    2.022039] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.048856] tsc: Refined TSC clocksource calibration: 3000.013 MHz
[    2.236690] usb 4-1: new full-speed USB device number 2 using ohci-pci
[    2.412538] usb 4-1: New USB device found, idVendor=045e, idProduct=028e
[    2.412541] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.412543] usb 4-1: Product: Controller
[    2.412545] usb 4-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
[    2.412546] usb 4-1: SerialNumber: 005F12E
[    2.680241] usb 4-3: new low-speed USB device number 3 using ohci-pci
[    2.798549] ata6.00: configured for PIO4
[    2.850106] usb 4-3: New USB device found, idVendor=04d9, idProduct=1203
[    2.850110] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.855037] hidraw: raw HID events driver (C) Jiri Kosina
[    2.881235] usbcore: registered new interface driver usbhid
[    2.881239] usbhid: USB HID core driver
[    2.883151] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5
[    2.883231] hid-generic 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:12.1-3/input0
[    2.888137] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input6
[    2.888215] hid-generic 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:12.1-3/input1
[    3.047966] Switched to clocksource tsc
[    3.499433] usb 5-2: new low-speed USB device number 2 using ohci-pci
[    3.601888] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223C  SB05 PQ: 0 ANSI: 5
[    3.605932] sr1: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.606064] sr 5:0:0:0: Attached scsi CD-ROM sr1
[    3.606116] sr 5:0:0:0: Attached scsi generic sg3 type 5
[    3.665265] usb 5-2: New USB device found, idVendor=15d9, idProduct=0a4f
[    3.665270] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.665272] usb 5-2: Product:  USB OPTICAL MOUSE
[    3.672547] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input7
[    3.672628] hid-generic 0003:15D9:0A4F.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[    3.807134] usb 3-3: new full-speed USB device number 2 using ohci-pci
[    3.986977] usb 3-3: New USB device found, idVendor=045e, idProduct=028e
[    3.986981] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.986983] usb 3-3: Product: Controller
[    3.986985] usb 3-3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
[    3.986987] usb 3-3: SerialNumber: 02F9FA4
[   34.916869] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   34.916875] ata6.00: failed command: IDENTIFY PACKET DEVICE
[   34.916879] ata6.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 21 pio 512 in
[   34.916879]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   34.916881] ata6.00: status: { DRDY }
[   34.916884] ata6: hard resetting link
[   35.408385] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   36.210289] ata6.00: configured for PIO4
[   37.010307] random: nonblocking pool is initialized
[   37.010327] ata6: EH complete
[   65.297363] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   67.844826] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   67.844832] ata6.00: failed command: IDENTIFY PACKET DEVICE
[   67.844836] ata6.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 6 pio 512 in
[   67.844836]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   67.844838] ata6.00: status: { DRDY }
[   67.844841] ata6: hard resetting link
[   68.336340] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   69.138573] ata6.00: configured for PIO4
[   69.938541] ata6: EH complete
[   70.259160] Adding 4194300k swap on /dev/sda3.  Priority:-1 extents:1 across:4194300k SSFS
[   70.261733] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   70.314810] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   70.397502] systemd-udevd[432]: starting version 204
[   70.492817] lp: driver loaded but no devices found
[   70.501712] ppdev: user-space parallel port driver
[   70.505608] parport_pc 00:06: reported by Plug and Play ACPI
[   70.505662] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   70.555495] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   70.555499] AMD IOMMUv2 functionality not available on this system
[   70.602575] lp0: using parport0 (interrupt-driven).
[   70.671529] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   70.671534] Disabling lock debugging due to kernel taint
[   70.693081] Bluetooth: Core ver 2.17
[   70.693498] NET: Registered protocol family 31
[   70.693500] Bluetooth: HCI device and connection manager initialized
[   70.693508] Bluetooth: HCI socket layer initialized
[   70.693510] Bluetooth: L2CAP socket layer initialized
[   70.693514] Bluetooth: SCO socket layer initialized
[   70.728116] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   70.728120] Bluetooth: BNEP filters: protocol multicast
[   70.728129] Bluetooth: BNEP socket layer initialized
[   70.729889] Bluetooth: RFCOMM TTY layer initialized
[   70.729902] Bluetooth: RFCOMM socket layer initialized
[   70.729908] Bluetooth: RFCOMM ver 1.11
[   70.746775] fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[   70.825964] init: cups main process (553) killed by HUP signal
[   70.825977] init: cups main process ended, respawning
[   70.839924] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3787 MBytes.
[   70.840077] <6>[fglrx]   vendor: 1002 device: 6719 count: 1
[   70.840376] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[   70.840607] <6>[fglrx] Kernel PAT support is enabled
[   70.840623] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[   70.871409] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[   70.871418] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   70.875448] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   70.875518] sp5100_tco: PCI Revision ID: 0x3c
[   70.875539] sp5100_tco: failed to find MMIO address, giving up.
[   70.892125] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input8
[   70.892231] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input9
[   70.892266] usbcore: registered new interface driver xpad
[   70.923771] MCE: In-kernel MCE decoding enabled.
[   70.929803] EDAC MC: Ver: 3.0.0
[   70.936548] AMD64 EDAC driver v3.4.0
[   70.936580] EDAC amd64: DRAM ECC disabled.
[   70.936584] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   70.936584]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   70.936584]  (Note that use of the override may cause unknown side effects.)
[   70.956744] hda-intel 0000:00:14.2: Using LPIB position fix
[   70.966013] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   71.006884] SKU: Nid=0x1d sku_cfg=0x4005c603
[   71.006888] SKU: port_connectivity=0x1
[   71.006889] SKU: enable_pcbeep=0x0
[   71.006890] SKU: check_sum=0x00000005
[   71.006899] SKU: customization=0x000000c6
[   71.006900] SKU: external_amp=0x0
[   71.006901] SKU: platform_type=0x0
[   71.006901] SKU: swap=0x1
[   71.006902] SKU: override=0x1
[   71.007153] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   71.007155]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   71.007156]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   71.007157]    mono: mono_out=0x0
[   71.007158]    dig-out=0x1e/0x0
[   71.007158]    inputs:
[   71.007160]      Front Mic=0x19
[   71.007161]      Rear Mic=0x18
[   71.007171]      Line=0x1a
[   71.007173] realtek: No valid SSID, checking pincfg 0x4005c603 for NID 0x1d
[   71.007174] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887
[   71.056954] kvm: Nested Virtualization enabled
[   71.056963] kvm: Nested Paging enabled
[   71.057056] device-mapper: multipath: version 1.6.0 loaded
[   71.076916] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[   71.083008] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[   71.083128] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   71.083203] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   71.084645] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   71.087269] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   71.087274] hda-intel 0000:01:00.1: Using LPIB position fix
[   71.087314] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
[   71.096233] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   71.104798] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[   71.392095] init: failsafe main process (714) killed by TERM signal
[   71.467023] init: samba-ad-dc main process (758) terminated with status 1
[   71.735021] r8169 0000:02:00.0 eth0: link down
[   71.735038] r8169 0000:02:00.0 eth0: link down
[   71.735142] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   71.736130] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   72.678703] init: plymouth-upstart-bridge main process ended, respawning
[   72.686488] init: plymouth-upstart-bridge main process (1300) terminated with status 1
[   72.686500] init: plymouth-upstart-bridge main process ended, respawning
[   72.820643] init: plymouth-stop pre-start process (1337) terminated with status 1
[   73.018408] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[   73.021266] <6>[fglrx] Firegl kernel thread PID: 1346
[   73.021507] <6>[fglrx] Firegl kernel thread PID: 1347
[   73.021748] <6>[fglrx] Firegl kernel thread PID: 1348
[   73.022030] <6>[fglrx] IRQ 44 Enabled
[   73.107834] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   73.107838] <6>[fglrx] Reserved FB block: Unshared offset:f8a0000, size:4000
[   73.107840] <6>[fglrx] Reserved FB block: Unshared offset:f8a4000, size:45c000
[   73.107841] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[   74.436727] init: udev-fallback-graphics main process (1546) terminated with status 1
[   77.400593] UDF-fs: INFO Mounting volume 'GRID', timestamp 2010/04/30 15:41 (1078)
[   77.571398] usb 2-1: new high-speed USB device number 3 using ehci-pci
[   77.704398] usb 2-1: New USB device found, idVendor=125f, idProduct=312b
[   77.704411] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   77.704418] usb 2-1: Product: ADATA USB Flash Drive
[   77.704423] usb 2-1: Manufacturer: ADATA
[   77.704428] usb 2-1: SerialNumber: 0000000000000336
[   77.720233] usb-storage 2-1:1.0: USB Mass Storage device detected
[   77.723334] scsi8 : usb-storage 2-1:1.0
[   77.724395] usbcore: registered new interface driver usb-storage
[   78.722939] scsi 8:0:0:0: Direct-Access     ADATA    USB Flash Drive  1.00 PQ: 0 ANSI: 6
[   78.727711] sd 8:0:0:0: Attached scsi generic sg4 type 0
[   78.731203] sd 8:0:0:0: [sdc] 61739008 512-byte logical blocks: (31.6 GB/29.4 GiB)
[   78.731569] sd 8:0:0:0: [sdc] Write Protect is off
[   78.731572] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
[   78.731945] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[   78.738023]  sdc: sdc2 < sdc5 >
[   78.740976] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[   78.939994] isofs_fill_super: bread failed, dev=sdc2, iso_blknum=16, block=32
[   78.943270] FAT-fs (sdc5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   89.767004] r8169 0000:02:00.0 eth0: link up
[   89.767025] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ducky@ducky ~ $

Gast
Gast


Nach oben Nach unten

Re: Problem laaaaaangsames booten von Ducky Rechner - dmesg

Beitrag  Gesponserte Inhalte


Gesponserte Inhalte


Nach oben Nach unten

Vorheriges Thema anzeigen Nächstes Thema anzeigen Nach oben


 
Befugnisse in diesem Forum
Sie können in diesem Forum nicht antworten